Skip to main content
All CollectionsTroubleshooting & FAQsHelp Article
Touch panel testing for the Vibe Board S1 55″
Touch panel testing for the Vibe Board S1 55″

A guide to test whether your ibe Board S1 55" touchscreen is defective.

Updated over a week ago

This article applies to the Vibe Board S1 55″.

The touch panel testing allows you to verify if the touchscreen on your Vibe Board S1 55″ is fully functional.


  1. On your Windows PC, download the touch panel testing software and unzip the file.

  2. Connect the "4. TOUCH" port on the S1 to your PC using a USB-C to USB-C cable. Also connect the "5. HDMI-IN" port to the PC using an HDMI cable.

  3. Since the touch function may not be working yet, connect a mouse to the USB-C port on the S1 (you may need a USB-A to USB-C adaptor). Then switch the input to the HDMI channel.

  4. Double-click to open the "IRTouchTestApp" on your PC.

  5. Check if it shows "PASS" or "FAIL". If it fails, there may be an issue with the touch panel that requires service.

💡 Tip

Need more help?

Did this answer your question?