All Collections
Troubleshooting & FAQs
Help Article
How to switch the audio output for Vibe Board Pro 75"
How to switch the audio output for Vibe Board Pro 75"

Learn how to redirect audio from your Vibe Board Pro 75" speaker to headphones, external speakers or other devices via HDMI or 3.5mm jack.

Updated over a week ago

This article applies to the Vibe Board Pro 75β€³.

Your Vibe Board Pro 75" allows you to connect headphones, speakers or other audio devices via the 3.5mm jack port or HDMI port.
To redirect the audio output, you will need to change the settings in VibeOS. Please follow the steps below according to your connection type.

3.5mm jack port

  1. Click "^" at the top right corner to open the control panel.

  2. Click ">" to access the Audio settings.

  3. Select Speaker (internal).

This is a one-time configuration which will not change back if you reboot your board.

HDMI port

  1. Click "^" at the top right corner to open the control panel.

  2. Click ">" to access the Audio settings.

  3. Select the device name you have connected to the HDMI port.

This is a one-time configuration which will not change back if you reboot your board.


πŸ’‘ Tip

Need more help?


Did this answer your question?