Skip to main content

How to configure HDMI ARC on Vibe Board S1 - (Arm RK3588)

Updated over 10 months ago

This article applies to the Vibe Board S1 55''/75" (Arm RK3588).

💡 Note: Our Vibe Board S1 - (Arm RK3588) HDMI-IN ARC supports a scenario where a device with ARC functionality is connected to the HDMI-IN port of the board.

Instructions:

  1. Connect the "HDMI-OUT (ARC/eARC)" port from your TV to the "HDMI-IN" port on the board.

    1. "eARC" is also supported as it is a more advanced version of ARC.

  2. If using a soundbar, be sure to select "TV" mode.

    1. For our test case, we are using a Sony HT-X8500 soundbar.

  3. On the board, tap the control panel in the right corner, then navigate to the "Audio settings". Switch the "Output" setting to "Speaker (HDMI ARC)".


💡 Tip

Need more help?


Did this answer your question?