Skip to main content
All CollectionsTroubleshooting & FAQsHelp Article
How to manually discover and pair your Vibe board for casting with Vibe One Web
How to manually discover and pair your Vibe board for casting with Vibe One Web
Updated over a month ago

💡 Note: In a few rare instances, a specific network environment may cause the Vibe One Web to be unable to detect your Vibe board. In these situations, manual discovery and pairing are required.

Instructions:

  1. On the board, tap the "Vibe Cast" icon on the homepage.

  2. Note the board ID from the casting guide page.

  3. On your device, visit https://one.vibe.us/ and log in. At the bottom, click “Can't find the board you're looking for? Try using the board ID.”

  4. Enter the board ID to locate your board.

  5. Once found your board under "Unpaired Devices", you can proceed to pair your board.

  6. After you click "Pair with this board", a message will appear on your board requesting permission to pair.

  7. Tap "ALLOW" on the board, and the pairing code will be displayed.

  8. Return to the Vibe One Web page on your device and enter the pairing code to complete the process.

  9. Your board will then be listed under "Paired Devices".



💡 Tip

Need more help?


Did this answer your question?