How to use Vibe Smart Camera

Vibe Smart Camera makes sure everyone is seen and heard clearly, puts your best face forward, and provides crystal clear audio pickup.

Updated over a week ago

Vibe Smart Camera is only available for the Vibe Board S1 55″/S1 75".

💡 Note:

  • This artcile applies to Vibe Board S1 55″ - Intel i5.

  • If you are using the Vibe Board S1 55" - Arm RK3588, please check this article for more information.

If the system prompts that you have used an incompatible camera, please check if your board and camera models match to ensure compatibility.

  • On a system with VibeOS Version 0.9.4 or higher, you should see this pop-up once a Vibe camera is plugged in:

  • If you unplug the camera, you'll see this pop-up:

  • You can also find camera controls in the Settings panel:

  • If the Vibe SmartCam Icon does not show, please please check this article

  • How can I choose the camera mode?

    • Manual Mode: You can manually adjust the framing area by dragging the multiplier bar and moving the yellow rectangle.

    • Auto-Framing: The camera will dynamically zoom in and out depending on how many people are in the camera's view. Use this mode for the best framing.

    • Gallery Mode: Everyone in the frame will have their own portrait window. The camera will focus on everyone separately.

  • How can I adjust the volume of my voice?

    • You can change the microphone volume in the secondary volume menu. Click the button shown in the red circle below to access the secondary menu.

  • If there's an update for the camera system, you'll see the below notification:


💡 Tip

Need more help?

Send an email to our Support Team or Submit a Support Ticket.


Did this answer your question?