This article applies to the Vibe Board S1 55'' (Intel i5).
Prerequisite:
💡 Note:
An external USB keyboard and a USB-A to USB-C adaptor are needed!
Please feel free to contact our support team, if you need any help with the steps below.
Instructions:
Make a USB installation drive
Download the image from here.
Uncompress the downloaded file so that you can see the "chromiumos_base_image.bin" file
Prepare a USB drive with at least 16 G. Please note all content on the drive will be erased.
Download USB imaging tool BalenaEtcher.
Follow the instruction to image the USB drive by using the chromiumos_base_image.bin file.
Flash the Image
Plug in the USB in Vibe’s USB slots and connect your USB Keyboard.
Press F11 or F7 during bootup to enter the boot mode selection.
Boot from the USB.
Once booted, follow the on-screen instructions for a full installation.
It takes approximately 10 mins for the process.
After installation, please unplug the USB and restart the system again.
Please follow the instruction here to clear the TPM.
💡 Tip
Need more help?
Send an email to our Support Team or Submit a Support Ticket.