Vibe Inc

This article applies to the Vibe Board S1 55"/S1 75".

The Vibe board does not support a direct Ethernet connection. You’ll need a USB-C to Ethernet adapter to connect via Ethernet, which should be plugged into either the "1.USB-C" or "2.USB-C" port on the board.

You can purchase a suitable adapter, such as the one linked below: 

<a href="https://www.amazon.com/Ethernet-Thunderbolt-Gigabit-Network-Compatible/dp/B07XTGKP5M/ref=asc_df_B07XTGKP5M/?tag=hyprod-20&amp;linkCode=df0&amp;hvadid=416961890636&amp;hvpos=&amp;hvnetw=g&amp;hvrand=18321683418135192724&amp;hvpone=&amp;hvptwo=&amp;hvqmt=&amp;hvdev=c&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9010614&amp;hvtargid=pla-870658638694&amp;psc=1&amp;tag=&amp;ref=&amp;adgrpid=96633979089&amp;hvpone=&amp;hvptwo=&amp;hvadid=416961890636&amp;hvpos=&amp;hvnetw=g&amp;hvrand=18321683418135192724&amp;hvqmt=&amp;hvdev=c&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9010614&amp;hvtargid=pla-870658638694" rel="nofollow noopener noreferrer" target="_blank">USB-C to Ethernet Adapter</a>

- You can purchase a suitable adapter, such as the one linked below: 
  <a href="https://www.amazon.com/Ethernet-Thunderbolt-Gigabit-Network-Compatible/dp/B07XTGKP5M/ref=asc_df_B07XTGKP5M/?tag=hyprod-20&amp;linkCode=df0&amp;hvadid=416961890636&amp;hvpos=&amp;hvnetw=g&amp;hvrand=18321683418135192724&amp;hvpone=&amp;hvptwo=&amp;hvqmt=&amp;hvdev=c&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9010614&amp;hvtargid=pla-870658638694&amp;psc=1&amp;tag=&amp;ref=&amp;adgrpid=96633979089&amp;hvpone=&amp;hvptwo=&amp;hvadid=416961890636&amp;hvpos=&amp;hvnetw=g&amp;hvrand=18321683418135192724&amp;hvqmt=&amp;hvdev=c&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9010614&amp;hvtargid=pla-870658638694" rel="nofollow noopener noreferrer" target="_blank">USB-C to Ethernet Adapter</a>
   


___________________________________________________________

Sent email to our <a href="mailto:support@vibe.us" rel="nofollow noopener noreferrer" target="_blank">Support Team</a> or <a href="https://knowledge.vibe.us/kb-tickets/new" rel="nofollow noopener noreferrer" target="_blank">Submit a Support Ticket</a>.

You'll need an adapter to connect your Vibe board to the local network via Ethernet.

💡 Tip