Skip to main content

Connecting Vibe Boards to Ethernet

The Vibe Board does not have a built-in Ethernet port. To connect to a wired network, you'll need a USB-C to Ethernet Adapter.

Updated over a month ago

This article applies to the following Vibe Board models:

  • Vibe Board S1 55" / 75"

  • Vibe Board S1 Pro 55" / 75"

Vibe Board S1 - 55" or 75"

Use either of the following ports:

  • 1.USB-C

  • 2.USB-C

Vibe Board S1 Pro - 55" or 75"

The S1 Pro models run two operating systems—each with its own network card. To connect both systems via Ethernet, you’ll need two USB-C to Ethernet adapters, one for each OS.

  • Windows OS: Use the 1.USB-C port

  • Vibe OS: Use the 3.USB-C port

You can purchase a suitable adapter, such as the one linked below:


💡 Tip

Need more help?


Did this answer your question?